Useful materials
  • Compatibility the charger is compatible with all electric cars equipped with Type2 connector
  • LCD display shows information about the current state of charging, allowing constant insight into the work of the device and its parameters
  • Current adjustment  allows to change the current to: 6, 10, 16, 20 and 32 A, depending on the needs and possibilities of the electrical installation
  • Resistance the device is characterized by high resistance to mechanical damage due to falling or pressure
  • Convenience a five-meter cable and a handle on the back of the housing make using the device comfortable and keeping order much easier
  • Protections the product is equipped with a number of safety features, which guarantee faliure-free operation of the charger and protection of the batteries against overheating

 

Features
  • Product code AK-EC-14
  • Product type Electric Car Accessory
  • Hole for padlock No
  • Supply voltage 110-250 V / 50/60 Hz
  • Number of phases 1 phase
  • Maximum current 32 A
  • Maximum power 7.2 kW
  • Ground wire Yes
  • Flame resistance UL94V-0
  • IP Rating IP54
  • OVP Yes
  • OCP Yes
  • OPP Yes
  • OTP Yes
  • SCP Yes
  • Cable length 5 m
  • The cable plug #1 IEC 60309 3-pin
  • The cable plug #2 Type 2 (IEC 62196-2) Female Connector
  • Cable material Copper
  • Wire gauge 3 x 6 mm2 + 2 x 0.75 mm2
  • Isolation material TPE
  • Material ABS
  • Product color Blue
  • Display Yes
  • MTBF 10000 h
  • Temperature -30 / +50 °C
  • Package Protective bag
  • Product size (L x W x H) 5000 x 150 x 85 mm
  • Package size (L x W x H) 380 x 380 x 100 mm
  • Net weight 2.8 kg
  • Gross weight 3.15 kg
  • CE compatibility Yes
  • FCC compatibility Yes
  • RoHS compatibility Yes
  • REACH compatibility Yes
  • Included accessories AK-AC-02
  • EAN code 5901720136848
  • Warranty 24 months

ratings

add_rating

Fast and safe charging of your electric car

The Akyga® AK-EC-14 single-phase charger is the way to fast charging without the multiphase connector. Don't have the possibility to install a three-phase installation in your garage or summer house? This is the perfect solution for you! The AK-EC-14 charger has increased charging power. The high-quality three-pin IEC 60309 connector will allow you to supply your vehicle with 32 A, which gives you up to 7.2 kW of power!

Charging without limits

Connector
Type 2

230 V Plug
CEE 3-pin

Rated current
6 A / 10 A / 16 A / 20 A / 32 A

Charger length
5 m

The long 5 m cable ends in a type 2 plug (IEC 62196-2). This fits the majority of cars manufactured for the European market. At the other end is a single-phase IEC 60309 plug, which guarantees a reliable and robust connection when quickly charging your vehicle. What's more, the charger also allows you to regulate the current according to your needs and the capabilities of your electrical installation. To take full advantage of the charger's capabilities, a 32 A electrical installation and the appropriate fuses are required.

Information you need on the LCD display

The practical ControlBox with integrated LCD display is located on the charger cable. Thanks to it, it is possible to regulate charging power, to set charging time limits and to display basic parameters such as charging current and power, mains voltage, total energy consumed by the device, charger temperature and charging time. As many as five current values are available: 6, 10, 16, 20 and 32 A. By choosing the right amperage, you can be sure that your electric vehicle's internal charger will not draw more power than your installation can handle.

Charging safety

The EVSE AK-EC-14 portable charging station has the most important features found mainly in wallboxes. These include, above all, safety features which provide the necessary protection for both the power supply itself and the vehicle being charged. This includes protection against excessive current and voltage, as well as against overheating of the charger and the vehicle battery. Furthermore, just like the wallbox, this charger can also be hung on the wall. For this purpose, a handle has been placed on the back of the housing, which not only helps to ensure tidiness, but also significantly reduces the risk of damaging the ControlBox.

Overcurrent protection. The charger will switch off if it detects an overload of the stabiliser.

Thermal protection protects against overheating of the power supply, which could result in damage.

Protection against overvoltage at the charger's output. Protects the device being charged from damage.

The built-in temperature sensor in the plug ensures safety and protects against the consequences of overheating the battery in the car. Thanks to a suitable controller, the device regulates the parameters so as to maintain the optimum temperature during the charging process.

Maximum durability

Fire resistance
UL94V-0

Adjustment
current

Degree of protection
IP54

Resistance
2t

In addition, the charger has been designed to withstand the harsh conditions specified by the IP54 sealing class. The materials from which it is made are extremely durable and resistant. Therefore it is not threatened by dirt or splashing. In addition, the plug has been protected by a plug, which protects the contacts against flooding or accidental damage.

Comfortable cover

Each charger comes with a convenient carrying case. The bag makes storage easier and ensures the safety of the EV cables.

The product is suitable for charging the batteries of electric cars, such as:

  • Audi A3 e-Tron 
  • BMW i3 
  • BMW i8 
  • Chevrolet Spark 
  • Hyundai Kona 
  • IONIQ 
  • Kia Niro 
  • Mercedes B Klasa E-Celi 
  • Mercedes S500 PHEV 
  • Mercedes SLS EV 
  • Mercedes Vito E-Cell Van 
  • Nissan Leaf 
  • Peugeot e-208 
  • Porsche Panamera S PHEV 
  • Renault Zoe 
  • Tesla Model 3 
  • Tesla Model S 
  • Toyota Prius Plug-In 
  • Volkswagen e-Up 
  • Volkswagen e-Golf 
  • Volvo V60 PHEV 
  • VW ID.3